In the process of factory production, pipeline transmission is essential, so the daily maintenance is also a work that cannot be careless. But most of the pipes are slender, so it is impossible for human eyes to observe it. At this time, the pipe endoscope is needed to enter the pipeline to help the maintenance personnel work.

Industrial endoscope is a new nondestructive testing instrument which integrates optics, precision machinery, electronic machinery, electronic technology and micro camera technology. Traditional non-destructive testing methods can not detect non-point surface defects. Optical fiber is used to transmit illumination light, micro camera and video signal. After processing and amplification, the video signal is sent to the display for imaging.

Clean pipeline is an important part of medical equipment and technology, and it is an important carrier for the transmission of various media in the process of pharmaceutical production. During the construction of pharmaceutical engineering, the slight carelessness of pipeline welding may cause serious consequences.

With the increasing capacity of single unit of thermal power plant and the increasing pressure of boiler, in order to avoid the safety problems and economic losses caused by foreign matter plugging and explosion, the pipeline inspection in installation and operation of thermal power plant has higher requirements.

With the development trend of rail transit manufacturing industry, the maintenance quality and efficiency of rail transit vehicles and other mechanical equipment are required to be higher and higher. Due to the characteristics of industrial endoscope nondestructive testing technology, it has become an important testing tool in the industrial field.

With the rapid development of industrial automation, robotics and other industries, the development of turbine and plug engine is also accelerating. Cylinder block is one of the most commonly used and important parts. Correct inspection and maintenance before leaving the factory can reduce the failure rate of cylinder block and improve its service life. It is very important for the normal operation of the whole equipment.

Thx series HD megapixel endoscope newly launched by Shenzhen JEET Technology Co., Ltd. has powerful features such as automatic white balance, manual white balance and manual exposure adjustment. It has a good processing effect for highly reflective workpieces and is no longer affected by reflective spots; For light absorbing objects, increase the exposure value to make the detected objects clearly visible. Worth recommending!

In the application of industrial endoscope, crack detection is one of its main applications. Because the probe diameter of the industrial endoscope is relatively small, it is easy to check the interior of the equipment through the slit or small hole, so that the tester can see the video image on the display, judge whether there are cracks, cracks and severity, and make correct replacement, maintenance or repair decisions.

Industrial endoscope is applied in the development, maintenance and repair of railway engineering vehicles and transport vehicles. How is industrial endoscope applied in the railway industry? JEET industrial endoscope today shares with you the specific application of industrial endoscope in railway engineering.

Industrial endoscope is a high-tech product based on nondestructive testing developed in petrochemical, industrial machinery, electrical and electronic, aerospace and other industries.

In the detection process of industrial endoscope, its implementation process is the result of the cooperation of multiple functional parts. Among them, the imaging clarity determines whether the defect can be found, and the guidance function affects the defect search speed. Probe guidance is very important to the detection efficiency, but sometimes the probe guidance becomes insensitive and inflexible in use.

As one of the important tools of nondestructive testing, industrial endoscope has very important applications in many industrial testing fields. As we all know, the probe is the core component of industrial endoscope, which is very expensive both in replacement price and maintenance cost. Therefore, the industrial endoscope probe must be used correctly. So how to protect the endoscope probe from damage in the detection process?

Industrial endoscope is an indirect visual inspection equipment, which widens the visual detection range of human eyes and breaks through the detection limit of human eyes.

When we purchase an industrial videoscope, light source，HD video，and durability is vital to choose an industrial videoscope. However, if you want to purchase a handheld industrial videoscope, please do not ignore the battery life, as it is one of the most important elements.

Why an industrial videoscope acts as an important role in oil gas industry? As we know, the security issue of oil gas tube is vital for residents, therefore we have to pay more attention to it. As the rapid development of oil gas industry facilities, more and more inspection jobs need to be carried out, as the results of that, the demands of an industrial videoscope rising significant.

Casting test is an essential method to find out flaws, and ensure the product quality. Today，there are many methods NDT for casting, the most commonly used is magnetic powder inspection, flurescent penetrant inspection, ultrasonic test, radiographic inspection,etc.

With the raising demands of industrial production and the rapid development of technology, industrial videoscope is more and more important in industrial production. An inspector is able to complete the inspection jobs more efficient and effective via correctly using a videoscope.
When an inspector uses a videoscope first time, he or she needs to finish a base operation training before inspection job. Take JEET T51X series videoscope as an example.

Generally speaking, Visual Testing (VT) is a kind of visual inspection via human eyes. Currently, an industry videoscope is widely used to provide a VT solution in many industrial fields like Automotive Manufacturing, Precision Casting, Automotive Maintenance, Police security Checking, Aviation and Aerospace Area, Special Inspection Institute,Pharmaceutical Machinery, Material Analysis,Explosion-proof Detection, Power and Energy, Industrial Equipment, Life Environment, Military Industries

Advantages of an industrial videoscope

Currently, an industrial videoscope is more and more used in visual testing（VT）, compare to a traditional videoscope, there are advantages as the following.

Shenzhen Jeet Technology Co., Ltd, known as JEET VIDEOSCOPE, is a high-tech enterprise, specialize in research and development, production,sales and inspection service of industrial videoscopes.

Nowadays，there are hundreds of videoscope manufacturers, it is vital for a buyer to choose a reliable supplier. There are many characteristics for a reliable manufacturer as the following.

Automotive videoscopes are used to check the internal components of automobiles. In automotive industry, for example, videoscopes are used during fixing or servicing of various automobiles in car repair shop.

An industrial videoscope is widely used in pharmaceutical industries to ensure the safety of drug production, and is essential for human health, so we will strengthen the oversight and supervision of drug quality. We will ensure workplace safety and reduce the occurrence of major accidents.

In industrial videoscope industry, the light source is an essential part of of an industrial videoscope. There are 2 main types of light source,LED and optical fiber.

Today, a mobile, Bluetooth, WIFI, NFC plays more and more important role, and it is convenient to people's life. Everyday, we carry out our activities via WIFI both in work and entertainment, and it is also an essential media for us to transfer images, videos or files.

Casting test is an essential method to find out flaws, and ensure the product quality. Today，there are many methods NDT for casting, the most commonly used is magnetic powder inspection, flurescent penetrant inspection, ultrasonic test, radiographic inspection,etc.

Based on different manufacturing technique of high precision seamless steel tube, there are different steel tube, such as pipe jacking, extruded tube, and hot rolled pipe.

Technical performance is vital for an industrial videoscope, and the quality is essential which has a influence to an industrial videoscope to carry out inspection activities.

What is a pipeline videoscope? In dairy life, we can see pipeline everywhere, no matter is natural gas pipeline,water pipeline, sewage pipeline, pipeline acts an essential role in our lives, and bring convenience. However, if the pipelines have some problems,it is difficult to repair. The pipeline needs a special transportation way, the internal is narrow, and it is difficult to inspect.

At present, a widely used visual inspection instrument is video endoscope, which is also one of the important methods in nondestructive testing. It is usually used to observe the surface state, alignment of mating surface, signs of deformation or leakage, such as parts, components and equipment. There are two methods of visual inspection: direct visual inspection and indirect visual inspection.

Industrial video endoscopes can be used to help human beings expand and improve their visual detection ability, and also bring good news to the fatigue test of civil aircraft. In order to make you better understand, today's editor of Shenzhen Jietai has sorted out the following examples for you. Let's have a look.

HAPPY DRAGON BOAT FESTIVAL BEST WISHES

Warmly Congratulate JEET Technology for Successfully Passing the Review of Quality Management System Certification and Environmental Management System Certification

The hose endoscope is mostly used in the field of police. It is used for security inspection, explosive disposal, anti smuggling, criminal investigation, search and rescue and other work in major organs and units. It can be used in public security, fire protection, armed police, procuratorate, customs and other organs and units.

Generally, aircraft engine endoscopy is divided into three types: routine inspection, targeted inspection and expanded area inspection. The importance of industrial endoscope in aero-engine inspection records is mainly reflected in the following three aspects:

A widely used visual inspection instrument at present is video endoscope, which is also one of the important methods in non-destructive testing. It is usually used to observe the surface state, alignment of mating surfaces, signs of deformation or leakage, etc., such as parts , components and equipment, etc.

Industrial endoscope is of great significance to the safety and effectiveness of aircraft. Through industrial borescope inspection, the engine disassembly, replacement, transportation and unnecessary shutdown losses are avoided, and the maintenance cost is saved. At the same time, the videoscope observation is intuitive, accurate, easy to operate, and can detect the internal damage of the engine in time.

For food, pharmaceutical and other industries, pipeline system is a very common component, and there are very high cleanliness requirements, unqualified pipeline welding quality and wrong evaluation of high cleanliness, which may lead to high and irreversible costs: bad consequences (even personal injury) caused by contaminated products entering the market

According to the requirements of aircraft maintenance manual and airworthiness instructions, industrial endoscope is often required, which is a very intuitive detection method to clarify the status of aircraft.